CI-PC96 Trace Oxygen Analyzer

1. 240×128 LCD display oxygen concentration and other settings;
2. Isolated 4-20mA signal output, with 0-100mV, 0-1V and 0-10V as options;
3. Easy to replace sensor;
4. Standard RS232 two-way communication port;
5. Two way SPST alarms;
6. Over pressure protection function and over purity range protection function;

7. Automatic data storage in a certain interval time, and browsing data at any time

Model:                   CI-PC96

Measure Range:            0-10/100/1000ppm, 1% O₂

Principle:                 Electrochemical

Measure Mode:            Online

Install:                   Dial mounted

Application:               Non dangerous general applications

Sensitivity:                0.5% F.S.

Measure Accuracy:          ≤±5% @ 0-10ppm ;  ≤±3% @ 0-100ppm;  ≤±2% @0-1000ppm

Stability:                  ≤±2.5% @ 0-10ppm;  ≤±1.5% @ 0-100ppm;  ≤±1% @ 0-1000ppm

Response Time:            T90<60s under 25℃

Sample Gas Temperature:    0-45℃

Sample Gas Flow:          1.2L/min

Sample Gas Pressure:       35-210KPa

Power Supply:             AC85~265, consumption lower than 20VA

Signal Output:             4-20mA DC isolated, with 0-100mV, 0-1V and 0-10V to switch

Alarms:                  2 way SPST alarm

Alarm Contact Capacity:     0.2A under AC240V

Display Resolution:         0.01%@%;  1ppm@100-10000ppm;  0.1ppm@10-100ppm;  0.01ppm@0-10ppm

Communication:            RS232 standard (RS485 optional)

Analyzer Size:             144 (W)×144 (H)×190 (D) mm

Air separation, Gases production, Protection gas for semi-conductors industry, Wave soldering & reflow soldering, Food production, Petro-chemical, and other oxygen purity detection in inert and hydrocarbon gas mixtures.