The main usage of filling cylinder of PSA Oxygen Generator, is the oxygen factory fill oxygen to the oxygen cylinder for external sales.
The oxygen cylinder can be used in conjunction with most oxygen storage equipment, allowing the customer to fill the cylinder in an hour. Short time, and saving cost.
Notes for Filling Cylinder of PSA Oxygen Generator:
1. Filling oxygen must go to the designated oxygen filling station.
2. The humidifier is prohibited to tilt strictly.
3. The ambient temperature shall not exceed 40℃.
4. Oxygen cylinder switch, open and close should be slow, do not overexert.
5. Oxygen filling cylinders shall be strictly prohibited from being contaminated with oil, collision and throwing. Away from heat sources, fires and inflammable and explosive articles. Avoid direct sunlight, and adhesive plaster shall not be affixed.
6. When not in use, the oxygen filling switch must be turned off.
7. Oxygen pressure in the cylinder shall not be lower than 0.05mpa.
8. If the oxygen filling cylinder fails in use, it shall not be disassembled at will, and it shall contact the distributor or the manufacturer in time.
Post time: Jul-21-2020
