All the parts in the Oxygen Generator system generally do not need the foundation, the clean indoor ground is OK. But for the larger specifications of air compressor, compressed air dryer, if it has basic requirements, you need to do the foundation. Meanwhile, for the convenience of equipment maintenance and cleaning, it is better to make a flat surface 10cm higher than the ground.
The sequence of each part in the Oxygen Generator system shall be connected and arranged in the order according to the oxygen production process. Before signing the contract, the customer shall provide the size or site drawing of the installation workshop, including the location of air inlet and oxygen outlet. Our company will provide the equipment layout and connection diagram of the whole Oxygen Generator system to the customer according to the actual site within two weeks after contract signing.
Generally speaking, all the parts of Oxygen Generator system are arranged along the wall of the workshop. Air compressor, cool dryer should be placed on the air outlet or well-ventilated place, if there is no air storage tank after the air compressor, the distance between the air compressor and the cool dryer should be as large as possible, the length of the pipeline between the two parts should be as long as possible, in order to reduce the compressed air temperature through the atmosphere environment. The distance between the equipment and the wall shall be at least 1m, and the distance between the equipment and the wall shall be at least 0.8m. The operating surface of the equipment shall be oriented in a direction convenient for personnel to operate, so as to facilitate personnel to operate, maintain and overhaul the equipment.
Piping connections between devices shall be based on the actual condition of all devices in place, and therefore the customer is responsible for these piping connections. All pipes should be hardwired (threaded or welded) and should be constructed by a professional to avoid leakage.
Post time: Aug-31-2020
